The amazing Arizona Hydrogen Flame Generator makes its own hydrogen and oxygen gasses from distilled water and burns them in a torch producing a 6000º F. flame. No separate tanks of fuel gasses are required.

This safe torch makes an ideal tool for welding, brazing, soldering, drilling, cutting, polishing and annealing for metals, ceramics, glass and plastics. All at an operating cost of just pennies per hour.

The Flame Generator internally produces hydrogen and oxygen gasses from the distilled water fuel, utilizing the electrolytic process. The gasses are generated naturally in the two-to-one ratio needed for efficient flame combustion.

Ordinary 110 or 220V AC power is converted to DC and used in the separation process. The line voltage is regulated through a step-down transformer with the voltage control to produce the desired rate of gas generation.

By varying torch tip size and gas pressure, the flame length may be adjusted from .01" to 6" through tips with openings from .003" to .062". With this flexibility, the Arizona Hydrogen Flame Generator is especially useful in applications where clean burning and close flame control are needed. With gas production and pressure easily adjustable, regardless of tip size, and the high temperature generated, the Flame Generator is well suited for welding and fusing platinum, copper, beryllium, nichrome, Chromel and other hard-to-handle metals.

Among the Flame Generator's applications are thermo-couple manufacture, annealing, spot welding, connecting terminals, butt welding and joining sheet stock.

For applications where torch temperatures of less than 6000º F. are needed, an optional alcohol Booster is available. The introduction of alcohol vapor lowers flame temperature to 4000-4500º F., while increasing BTU output. Even lower temperatures may be achieved by varying flame size, varying flame distance and application time. Fluxes may be added to the Booster and fed directly into the flame for ease in soldering gold and silver, silver brazing and soft solder applications. The Flame Generator is equally easy to use for glass polishing and hole drilling in quartz and ceramics, as well as in metal cutting. The wide range of torch tip sizes and the regulation of gas pressure allows use with metals from .0005" to a .25" thickness.

The Arizona Hydrogen Flame Generator has wide acceptance throughout the industrial, electronics, jewelry manufacturing, laboratory, and glass, ceramics and plastics industries. Among the three models offered with varying gas production capacities, there's a Flame Generator that's just right for your application, too. For complete details on ordering and continuing maintenance, contact your local representative, or call the factory direct at 602-275-4126.